Category: Repair Logs
-
Roc’N Rope PCB Issues
Got an interesting problem with a Roc’N Rope board that I recently connected up to the new JAMMA test rig. It has all its sounds, and plays correctly, but the text and tiles (e.g. the title graphics and the graphics used to build the levels) are all upside-down! When the screen is flipped for cocktail…
-
Centipede Cocktails — Cocktail #2
My previous post, about Cocktail #1, clearly documents the “easy one.” This second one is gonna be another story. It has a very dead monitor, and a non-functional board. I have not yet benched the monitor, but it has no neck glow, which is never a good sign. The board has problems, but at least…
-
Centipede Cocktails — Cocktail #1
Well, I ended up taking two Centipede cocktails off of another local collector as a package deal. Still want that Gorf, though… Will have to come back to that one soon! But I digress… So I have two Centipede cocktails here. One of them has a dead monitor (and a non-working board, I later discovered),…
-
Sprint 2 – Stiff Steering and Hard Shifting
Problem: Stiff spinning steering modules and hard shifting between gears (Quick little story – while bringing this beast into its location, I fell and got pinned under it for a few minutes. It is amazing how much having your chest compressed effects your ability to call out for help! 🙂 OK – onto the next…
-
Punch-Out vertical foldover/overdraw
The Punch-out that I recently obtained has a monitor issue (a monitors issue, really). Both displays are bring drawn starting ~2″ from the bottom of the monitor, and the upper few inches are being overdrawn on the same horizontal plane. In other words, the beam is scanning left/right correctly but is starting too low and…
-
Punch-Out
Problem: Dead Purchased a Punch-Out in dead condition. Got it home, still dead. Rocking the game and/or whacking the sides a bit got a brief flash of light on it so I went in and reconnected all connectors. Game then came up right after that. A little adjustment to the micro-switch arms and the game is…
-
Unknown Atari Kangaroo Board
Atari Kangaroo – After watching the attract mode for a little bit (~30 seconds), the game started to show some visual artifacts on the RHS of the screen. They were horizontal blurbs that looked like multicolor static. However, each of the blurbs, while in a random vertical location, were identical.