{"id":393,"date":"2020-04-03T20:41:25","date_gmt":"2020-04-03T16:41:25","guid":{"rendered":"http:\/\/www.jrtwine.com\/blog\/?p=393"},"modified":"2020-04-03T20:41:25","modified_gmt":"2020-04-03T16:41:25","slug":"lithium-battery-replacement-for-williams-and-other-cmos-systems","status":"publish","type":"post","link":"https:\/\/jrtwine.com\/blog\/lithium-battery-replacement-for-williams-and-other-cmos-systems\/","title":{"rendered":"Lithium Battery Replacement for Williams and other CMOS Systems"},"content":{"rendered":"

So you have decided to reduce the risk of battery leakage damaging your precious Williams arcade or pinball board by replacing the existing AA batteries with a lithium (CR2032) replacement.\u00a0 Great!\u00a0 Lithium batteries like the CR2032 tend to leak much less than alkaline batteries so this is a good generally a good idea.<\/p>\n

Note that I said “much less than alkaline batteries<\/em>“<\/strong> – lithium batteries can still leak causing damage to your PCB!
\nYou need to maintain them like any other battery system.<\/h5>\n

So now the question is, how long will the lithium battery last before it needs to be replaced?\u00a0 I would suggest that you replace the battery as soon as it voltage-under-load drops to 2.8v.\u00a0 Why 2.8?\u00a0 Two good reasons.\u00a0 First, here is a discharge graph pulled from the Energizer CR2032 datasheet<\/a>:<\/p>\n

\"Battery<\/a>
Discharge Graph of a CR2032 battery<\/figcaption><\/figure>\n

Notice that the voltage starts to fall off a cliff<\/em> at about 2.8 volts – this is important.\u00a0\u00a0Alkaline batteries fall off more gradually, as shown by this graph from the Energizer Alkaline Application Manual\/Handbook<\/a>:<\/p>\n

\"Alkaline<\/a>
Discharge Graph of a AA Alkaline Battery<\/figcaption><\/figure>\n

A triple-pack of AA batteries produces ~4.5v<\/strong> (3 \u00d7 ~1.5v<\/strong> per battery).\u00a0 This goes through a blocking diode (typically a 1N4001<\/strong><\/a>) that causes a voltage drop of ~0.7v<\/strong>, yielding ~3.8v<\/strong> to the CMOS.\u00a0 \u00a0The 6514\/5514\/5114 CMOS chips have a minimum data retention voltage of 2.0v<\/strong>.\u00a0 With fresh AA batteries, you have ~1.8v<\/strong> of voltage you can stand to lose before you will have problems.\u00a0 Due to the voltage curve of AA batteries, a\u00a0pack of AA batteries will be able to supply the minimum voltage almost until they have completely discharged.<\/p>\n

However, a single lithium CR2032 has a nominal voltage of 3.0v<\/strong>.\u00a0 After the voltage loss across the blocking diode, you will have 2.3v<\/strong> going to the CMOS.\u00a0 That only leaves you with 0.2v<\/strong> of wiggle room.\u00a0 The good news is that the lithium battery tends to maintain its voltage for most of its discharge cycle before it falls off a cliff, as shown by its graph.\u00a0 But once you cross that 2.8v<\/strong> threshold you only have 0.1v<\/strong> left and things literally start to go downhill, fast<\/em><\/strong>.\u00a0 So – when should you replace a lithium battery?\u00a0 When its voltage-under-load hits 2.8v<\/strong>.<\/p>\n

One way to slightly extend the useful life of the CR2032 may be to replace the blocking diode with a Schottky diode<\/a> (e,g, a 1N5817<\/strong><\/a>), which has a typical voltage drop of 0.45v<\/strong>.<\/p>\n","protected":false},"excerpt":{"rendered":"

So you have decided to reduce the risk of battery leakage damaging your precious Williams arcade or pinball board by replacing the existing AA batteries with a lithium (CR2032) replacement.\u00a0 Great!\u00a0 Lithium batteries like the CR2032 tend to leak much less than alkaline batteries so this is a good generally a good idea. Note that […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3,1,58],"tags":[],"class_list":["post-393","post","type-post","status-publish","format-standard","hentry","category-repair-logs","category-uncategorized","category-williams"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t