errors
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
errors [2020/02/17 10:05] adminz created |
errors [2020/04/12 10:48] (current) jtwine |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| ==== Parser Errors ==== | ==== Parser Errors ==== | ||
| - | All parser error numbers start with a "P". This list is not exhaustive, it will only contain the parser errors that I have been able to generate on purpose. But even if the error is not listed here, it should be easy to figure out from the error message itself. | + | All parser error numbers start with a "P". This list is not exhaustive, and since different parser error codes may be emitted with the same underlying error message, this list will only list the messages. |
| - | ^ Number ^ Text ^ Details ^ | + | ^ Text ^ Details ^ |
| - | ^ P0188: ^ Byte values must be between 0x00000000 and 0x000000FF (0 and 255) ^ An value was specified that was expected to be within the range of a byte, but exceeded that range. ^ | + | ^ Byte values must be between 0x00000000 and 0x000000FF (0 and 255) ^ An value was specified that was expected to be within the range of a byte, but exceeded that range. ^ |
| + | ^ Syntax error, expected: %%;%% ^ The line in question or the line above it is missing the statement terminator, which is a semicolon, or an invalid character was present in a label or program name.^ | ||
| + | ^ Syntax error, expected: DisplayString ^ The ''Display'' statement expects a quoted string but something else was provided instead. ^ | ||
| + | ^ Strings used in Display and Serial statements cannot be longer than 32\\ printed characters ^ The ''Display'' and ''Serial'' statements in 10LC limit the string to 32 //printed// characters. ^ | ||
| + | ^ Invalid character: %%' " '%% ^ If this error is shown at the start of the quoted string for a ''Display'' or ''Serial'' statement, it actually means the quoted string contains at least one unsupported character. ^ | ||
| + | ^ Syntax error, expected: RegName, Symbol, IntegerValue, Not, And, Or,\\ ShiftL, ShiftR, Increment, Decrement, Goto ^ This usually means that an unexpected comparison operator or symbol was encountered in an ''If'' expression. ^ | ||
| + | ^ Syntax error, expected: SetupBeep, SetupInteractiveErrors,\\ SetupEnableFL, SetupLineSize, SetupNewline, SetupPod,\\ SetupXOn, SetupXOff, SetupPodTimeout, SetupTraps,\\ Program, EndProgram, Read, Write, WriteCtrl, Learn,\\ Alias, Const, Global, RegName, Symbol, Increment,\\ Decrement, Execute, SetupMemMap, Display, AutoTest, BusTest,\\ LongRAMTest, ShortRAMTest, ROMTest, IOTest, Not, Ramp, Walk,\\ ToggleAddress,\\ ReadProbe, ReadTape, WriteTape, ToggleData, ToggleCtrl,\\ ReadStatus, Stop, RunUUT, LabelMarker, Goto, If, Sync, Setup,\\ Delay, Fill, FillRamp, Serial, ShiftL, ShiftR, CompilerDirective, Equals, AndEquals, OrEquals, ShiftLEquals, ShiftREquals ^ This is a long error saying that you likely doubled a semicolon somewhere or used a keyword/statement that does not exist in 10LC. ^ | ||
| + | ^ Syntax error, expected: Repeat, Loop, ;, Into ^ A statement has an unsupported value in it. ^ | ||
| - | ^ L0513 ^ Compiled line may be too long for execution ^ The 9010A has a limit on how long a single step can be. This limit varies between 35-47 keystrokes depending on the keystrokes used to build the expression. ^ | + | ==== Compiler Errors ==== |
| - | ^ L0514 ^ The SetupPod statement was not specified ^ A statement was encountered which requires that a Pod be specified. ^ | + | ^ Error ^ Text ^ Details ^ |
| - | ^ L0515 ^ The IF expression is redundant because it always evaluates to TRUE and will be optimized ^ An ''If'' statement was encountered that will always test **true** so it was removed and replaced with the resulting ''Goto'' statement. ^ | + | ^ L1024 ^ ICE: Unable to find handler for <exp> ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0516 ^ The IF expression is redundant because it always evaluates to FALSE and will be optimized ^ An ''If'' statement was encountered that will always test **false** so it was removed entirely. ^ | + | ^ L1025 ^ ICE: Pod name <name> is unknown ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0517 ^ The INTO expression is redundant because it specifies Register E as the copy-into register and will be optimized ^ A ''Read'' expression used an ''Into'' modifier but specified Register E as the register to copy the value into. Register E is the register that gets the value from the ''Read'' expression, so there is no need for the additional copy-into step. ^ | + | ^ L1026 ^ ICE: Unexpected operator type <optype> encountered for {symbol} ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0517 ^ The INTO expression is redundant because it specifies Register C as the copy-into register and will be optimized ^ A ''ReadCtrl'' expression used an ''Into'' modifier but specified Register C as the register to copy the value into. Register C is the register that gets the value from the ''ReadCtrl'' expression, so there is no need for the additional copy-into step. ^ | + | ^ L1027 ^ ICE: Unexpected IF operator type {optype} encountered ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0518 ^ Program <ProgramName> contains defined label <LabelName> which was never referenced ^ The specified program created (defined) a label called <LabelName> but this label was never referenced in any ''Goto'' statements in the program. ^ | + | ^ L1028 ^ ICE: No value obtained for resolved Const ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0519 ^ Program <ProgramName> contains a constant named <ConstName> which was never referenced ^ Program <ProgramName> defined a constant called <LabelName> which was never referenced ^ | + | ^ L1029 ^ ICE: Unexpected IF modifier type {modtype} encountered ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0520 ^ Program <ProgramName> contains a alias named <AliasName> which was never referenced ^ Program <ProgramName> defined an alias called <AliasName> which was never referenced ^ | + | ^ L1030 ^ ICE: No register obtained for resolved Alias ^ This is an Internal Compiler Error that should not occur - contact me if it does. ^ |
| - | ^ L0521 ^ The specified signature value {0} is greater than 0xFFFF (65535), only the 2 least significant bytes will be used ^ A signature value was specified on a ''ROMTest'' statement, but its value exceeded ''0xFFFF''. Signature values are limited to 16 bits. ^ | + | ^ L1512 ^ <value> was unexpected, expected a Register or an Alias ^ A value was specified where a register (or an alias) was expected. ^ |
| - | ^ L0522 ^ The specified address <address> may be out of range for the selected pod, whose address limit is <limit> ^ An address was specified with a statement that may be too large for the address range of the selected Pod's CPU ^ | + | ^ L1513 ^ <name> was unexpected, expected a Value or Const ^ A register or alias was specified where a value (or constant) was expected. ^ |
| - | ^ L0523 ^ The specified Force Line Name <name> is too long and will be shorted to <shortened> ^ Force Line names are limited to 6 characters in length, and the specified name (<name>) was shortened to <shortened>. ^ | + | ^ L1514 ^ <something> was unexpected, expected a Value, Const, Register, Alias or an Expression ^ An unrecognized symbol was specified where a value, constant, register, alias or expression was expected. ^ |
| - | ^ L0524 ^ The list of Force Line Names has a duplicate Name ^ A duplicate name was specified in the list of Force Line names. ^ | + | ^ L1515 ^ <something> was unexpected, expected a Value, Const, Register, or an Alias ^ An unrecognized symbol was specified where a value, constant, register, or alias was expected. ^ |
| - | ^ L0525 ^ A global constant named <GlobalName> was created but was never referenced ^ A Global Constant was created but was never used in any code. ^ | + | ^ L1516 ^ <something> was unexpected, expected an Expression ^ An unrecognized symbol was specified where an expression. ^ |
| - | ^ L0526 ^ Program <ProgramName> (<Program#>) contains no executable code ^ The specified program does not contain any real executable code - it is nothing more than a ''Program'' statement. ^ | + | ^ L1517 ^ The Loop option can only be specified once on a statement ^ The ''Loop'' execution option can only be specified once on a statement. ^ |
| - | ^ L0527 ^ Value <HexValue> (<DecimalValue>) exceeds the specified CPU's data size ^ A value was specified in a ''Write'' statement that exceeds the word-side of the configured Pod's CPU. ^ | + | ^ L1518 ^ The Loop option can only be specified as the last option on a statement (after any Repeat options) ^ The ''Loop'' execution option can only be specified as the last or only option on a statement. ^ |
| + | ^ L1519 ^ <value> was unexpected as the INTO value; expected a Register or an Alias ^ You must specify a Register or an Alias with the INTO version of the ''Read'' statement. ^ | ||
| + | ^ L1520 ^ The symbol <symbol> is unknown and could not be identified as a Constant or an Alias ^ You have specified a symbol that cannot be found in any of the global or local symbol tables. ^ | ||
| + | ^ L1521 ^ The <statement> statement can only be used inside the context of a Program ^ In 10LC, certain statements can only be used inside of a Program. This is one of them. ^ | ||
| + | ^ L1522 ^ The <statement> statement can only be used outside the context of a Program ^ In 10LC, certain statements can only be used outside of a Program. This is one of them. (If getting this with a ''Program'' statement, did you forget an ''EndProgram'' statement?) ^ | ||
| + | ^ L1523 ^ A Program named <name> has already been created or referenced ^ A program with the same specified name already exists. ^ | ||
| + | ^ L1524 ^ A Program with number <number> ("<name>") has already been created or referenced ^ A program with the same specified number already exists. ^ | ||
| + | ^ L1525 ^ The specified program number is out of range - it must be between 0 and 99 ^ Program numbers on the 9010A between 9 and 99 (in decimal). ^ | ||
| + | ^ L1526 ^ The specified label <label> already exists as label number <number> ^ You created a label using a name or number that has already been used by another Label in the program. ^ | ||
| + | ^ L1527 ^ An Alias named <name> has already been created ^ A local Alias already exists with the same specified name. ^ | ||
| + | ^ L1528 ^ An Constant named <name> has already been created ^ A local Constant already exists with the same specified name. ^ | ||
| + | ^ L1529 ^ An Global Constant named <name> has already been created ^ A global Constant already exists with the same specified name. ^ | ||
| + | ^ L1530 ^ The display string must be no longer than 32 printable characters ^ In 10LC the strings used with the ''Display'' statement have a //printable// limit of 32 characters. ^ | ||
| + | ^ L1531 ^ A shift count of <value> is invalid; expected a value from 1 to 32 ^ With shift operations, you can only specify a shift count between 1 and 32. ^ | ||
| + | ^ L1532 ^ <value> was unexpected as a bit count; expected a Value or an Constant ^ The specified value cannot be used to indicate a bit count. ^ | ||
| + | ^ L1533 ^ Forcing line name <name> was not understood - are you using the correct Pod? ^ You have specified a Forcing Line name that was not found in the configuration of the selected Pod. ^ | ||
| + | ^ L1534 ^ Forcing line number <number> was not understood - are you using the correct Pod? ^ You have specified a Forcing Line number that was not found in the configuration of the selected Pod. ^ | ||
| + | ^ L1535 ^ Only one {modifier} statement is allowed. ^ You can only specify the indicated modifier once. ^ | ||
| + | ^ L1536 ^ If specified, the SetupPod statement must be the first statement in a 10LC file ^ Since Pod configuration affects other setup information, if you are going to specify a Pod, it must be the first statement present. ^ | ||
| + | ^ L1537 ^ <symbol> is not a valid compiler directive ^ You have specified something that was not recognized as a valid compiler directive. ^ | ||
| + | ^ L1538 ^ Program <name> contains a reference to label <name> which was never defined ^ The specified Program referenced the specified Label (via a ''Goto'' statement) but never defined that label. ^ | ||
| + | ^ L1539 ^ Compilation stopped because the WarningsAreErrors option is set and a warning was emitted ^ A warning was generated but since the WarningsAreErrors option was set, this stops compilation. ^ | ||
| + | ^ L1540 ^ The extended statements are unavailable because the EnableIntrinsicStatements option was not set ^ The EnableIntrinsicStatements option must be set in order to use the extended/intrinsic statements. ^ | ||
| + | ^ L1541 ^ The SetupPod statement has already been specified (possibly in another file) ^ The ''SetupPod'' statement can only be specified once. ^ | ||
| + | ^ L1542 ^ The SetupBeep statement has already been specified (possibly in another file) ^The ''SetupBeep'' statement can only be specified once. ^ | ||
| + | ^ L1543 ^ The SetupInteractiveErrors statement has already been specified (possibly in another file) ^ The ''SetupInteractiveErrors'' statement can only be specified once. ^ | ||
| + | ^ L1544 ^ The SetupBusTestAddress statement has already been specified (possibly in another file) ^ The ''SetupBusTestAddress'' statement can only be specified once. ^ | ||
| + | ^ L1545 ^ The SetupRunUUTAddress statement has already been specified (possibly in another file) ^ The ''SetupRunUUTAddress'' statement can only be specified once. ^ | ||
| + | ^ L1546 ^ The SetupXOn statement has already been specified (possibly in another file) ^ The ''SetupXOn'' statement can only be specified once. ^ | ||
| + | ^ L1547 ^ The SetupXOff statement has already been specified (possibly in another file) ^ The ''SetupXOff'' statement can only be specified once. ^ | ||
| + | ^ L1548 ^ The SetupLineSize statement has already been specified (possibly in another file) ^ The ''SetupLineSize'' statement can only be specified once. ^ | ||
| + | ^ L1549 ^ The SetupPodTimeout statement has already been specified (possibly in another file) ^ The ''SetupPodTimeout'' statement can only be specified once. ^ | ||
| + | ^ L1550 ^ The SetupNewline statement has already been specified (possibly in another file) ^ The ''SetupNewline'' statement can only be specified once. ^ | ||
| + | ^ L1551 ^ The SetupMaskFLMayBeEnabled statement has already been specified (possibly in another file) ^ The ''SetupMaskFLMayBeEnabled'' statement can only be specified once. ^ | ||
| + | ^ L1552 ^ The SetupForcingLineNames statement has already been specified (possibly in another file) ^ The ''SetupForcingLineNames'' statement can only be specified once. ^ | ||
| + | ^ L1554 ^ A Global Alias named <name> has already been created ^ A global Alias already exists with the same specified name. ^ | ||
| + | ^ L1555 ^ A Program cannot execute itself ^ A Program has an ''Execute'' statement that references itself and recursive calls are not supported on the 9010A. ^ | ||
| + | ^ L1556 ^ An unescaped <char> character is followed by <symbol> which was identified as a const value, not a valid register name or Alias. ^ A Program has specified a Constant after a special character that expects a Register identifier. ^ | ||
| + | ^ L1557 ^ An unescaped <char> character is followed by <symbol> which was not identified as a valid register name or Alias. ^ A Program has specified an unknown symbol after a special character that expects a Register identifier. ^ | ||
| + | ^ L1558 ^ There is a limit of 16 Labels per Program ^ A Program can only have 16 labels defined. ^ | ||
| + | ^ L1559 ^ There is a limit of 100 Programs ^ Only 100 Programs can be created on the 9010A. ^ | ||
| + | ^ L1560 ^ Invalid program number <num> specified - program numbers have a range of 0 to 99. ^ A Program declaration specified a Program Number but the specified number was out of range. ^ | ||
| + | ^ L1561 ^ An unescaped <char> character is followed by whitespace instead of a valid register name or Alias. ^ An unescaped <char> character is followed by whitespace where a Register identifier was expected. ^ | ||
| + | ^ L1562 ^ Program <name> was never defined ^ An program named <name> was referenced but was never actually defined. ^ | ||
errors.1581955503.txt.gz · Last modified: 2020/02/17 10:05 by adminz
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
